What Amber LED flashing Means
A flashing amber LED on DCS RF24-D refrigerated drawers means power was lost at some point. The guide explains that the drawers also flash amber on first plug-in, because every unit is powered at the factory for a performance check and then switched off. The light keeps flashing until someone resets it.
Common Causes of Amber LED flashing
- First plug-in after installation (normal)
- Utility power outage or a storm
- GFCI outlet tripping after water reached it
- Loose plug or worn outdoor receptacle
🔧 One Safe Check You Can Try
Press ON/OFF for about one second to clear it. If the amber light returns on its own over the following days, the outlet is losing power: check the GFCI outlet, which outdoor kitchens trip often after rain or hosing down the island, and the breaker. If power at the outlet is steady, the drawers need a look.
⚠ Why You Shouldn't Go Further Than That
- A GFCI that keeps tripping can be pointing at current leaking to ground inside the drawers, which is an electrical diagnosis with the unit pulled out, not a reason to swap in a non-GFCI outlet.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- Amber LED flashing
- Appliance
- DCS outdoor refrigeration
- Maker documentation
- DCS owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with DCS Appliance Repair.