What F2-10 / F2-11 / F2-12 / F2-15 / F2-18 / F2-19 / F2-21 / F2-23 / F2-24 / F2-25 Means
The service manual for the DCS WOSV230 and WODV230 groups power-board errors 10, 11, 12, 15, 18, 19, 21, 23, 24 and 25 as critical software or hardware errors. They appear as F2 on the master board and F3 on the lower oven’s board. As with the clock module equivalents, the remedy is a power reset first and power board replacement if the error persists.
Common Causes of F2-10 / F2-11 / F2-12 / F2-15 / F2-18 / F2-19 / F2-21 / F2-23 / F2-24 / F2-25
- Power board hardware failure
- Board damaged by heat from a failing cooling fan
- Corrupted software after a surge
🔧 One Safe Check You Can Try
Turn the oven off at the breaker once it is cool, wait a minute and restore power. Record the exact code if it returns, and book service. Do not keep resetting and cooking; a board reporting a hardware error cannot be trusted to control heat.
⚠ Why You Shouldn't Go Further Than That
- The replacement board must be installed, reconnected to the correct harnesses and matched to the model ID, all with the oven out of its cabinet.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- F2-10 / F2-11 / F2-12 / F2-15 / F2-18 / F2-19 / F2-21 / F2-23 / F2-24 / F2-25
- Appliance
- DCS wall ovens (legacy indoor)
- Maker documentation
- DCS owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with DCS Appliance Repair.