The DCS27FS-BQR comes from the earliest DCS grill generation still commonly found, when the company was Dynamic Cooking Systems, Inc. Model numbers of that era start with DCS itself. Many body parts are no longer made, but burners, electrodes and knobs can often be matched. We are honest about grills of this age: if a […]

The DCS36DS-BQAR is a 36-inch grill from the DS series, listed with two sibling models in the same guide. On grills of this age, corrosion at the firebox seams is the thing to check first, because it decides whether new burners are worth fitting. If the firebox is sound, a new ignition switch and electrodes […]

The 48-inch DCS48DS-BQAR has a large, heavy hood, and when its hinges or counterbalance wear it becomes hard to lift and dangerous to drop. Hinge and spring repair is usually possible even on this early model. With several burners across the width, one weak burner is easy to spot with a quick flame check at […]

The DCS48E-BQARN is a 48-inch natural-gas grill from DCS’s E series. On these grills the grease path from the firebox to the tray is long, and when it clogs, grease pools and ignites. Cleaning the path is part of any service. A rotisserie back burner that has turned dark and glows weakly is at the […]

The BGC30-BQR is the rotisserie version of the 30-inch BGC grill. On older units the rotisserie back burner, which faces heat and grease for hours at a time, can crack; a cracked back burner is replaced rather than repaired. On LP carts, a regulator that freezes or hums is a sign it is failing, and […]

The BGB30-BQRN is the natural-gas 30-inch grill from DCS’s BGB series, one of the lettered BGA, BGB and BGC grill generations that came before today’s Series 7 and Series 9. Cracked ceramic insulators on the ignition electrodes are common at this age and cause the spark to jump to the wrong place. A burner with […]

DCS sold the BGB36-BQAR on the strength of its 25,000 BTU U-shaped stainless burners. The U-shape spreads heat well but the tight bends are where cracks start on an old grill, so we inspect each burner along its full length. A burner that has slipped off its orifice or rear support heats unevenly and can […]

The BH1-30-N is the compact Series 7 grill with no rotisserie. A knob that turns freely without changing the flame usually means the knob has split where it grips the valve stem; that is a cheap part. A valve stem that turns but will not close fully is a different matter and needs a licensed […]

The BGB48-BQAR is the 48-inch version in the BGB guide. On a grill this wide, a rotisserie back burner that is slow to light is usually a dirty electrode or a weak spark rather than gas. A warped drip tray lets grease reach the cabinet below, which is worth fixing before it becomes a grease […]

The BGC30-BQ-N comes from the BGC generation that DCS still lists next to the newer BH1 grills. Its burners light one at a time and then cross-light, so a burner that will not catch from its neighbor often has blocked ports along the edge that faces the lit burner. Parts from the BGC and BH1 […]