What F2-04 / F3-04 Means
F2-04 and F3-04 on DCS WOSV230 and WODV230 ovens are communication errors seen from the power board side: the clock module did not respond in time or at all. They pair with F1-04 and F1-05, which report the same broken link from the clock module’s side.
Common Causes of F2-04 / F3-04
- Connector between the power board and clock module loose
- Clock module failing
- Harness damaged by heat above the oven cavity
🔧 One Safe Check You Can Try
Reset power once at the breaker when the oven is cool. If the error returns, book service and mention whether the clock display was blank or frozen when it happened.
⚠ Why You Shouldn't Go Further Than That
- The manual checks the connection first and replaces the clock module only if the connection is sound, work done with the oven pulled forward.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- F2-04 / F3-04
- Appliance
- DCS wall ovens (legacy indoor)
- Maker documentation
- DCS owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with DCS Appliance Repair.